OEM/ODM Aluminum Clad Exterior Doors Suppliers & Exporter

Aluminum clad wood doors combine the best characteristics of two distinct materials. Solid wood provides exceptional natural thermal insulation, high structural rigidity, and luxurious indoor aesthetics. However, exterior raw wood is prone to warping, rotting, fading, and thermal movement when exposed to rain, snow, and severe sunlight. By shielding the interior timber with an exterior snap-on T6063-T5 extruded aluminum frame (separated by non-conductive mechanical clips), the exterior aluminum absorbs all weather exposure while the interior wood retains its structural integrity and interior visual warmth without requiring frequent exterior repainting.

Yes. As a dedicated OEM/ODM manufacturer, 100% of our production is custom-engineered to order. We accommodate non-standard opening heights (up to 4.5 meters for oversized pivot and sliding systems), custom glass build-ups, specialized acoustic laminates, architectural grid designs, and custom color-matching (RAL colors, anodized tones, wood-grain transfers, and PVDF coatings).

Our aluminum clad door systems are engineered and tested to satisfy major international fenestration standards, including North American NFRC (thermal rating), AAMA/WDMA/CSA 101/I.S.2/A440 (structural, air, and water performance), European CE (EN 14351-1), and Australian AS2047 standards. We can provide full laboratory test reports for wind load pressure, water penetration resistance, and acoustic STC ratings upon request.

We source premium, sustainably harvested timber (FSC certified) including European Red Pine, Larch, American White Oak, Black Walnut, Teak, and Sapele. All timber undergoes multi-stage kiln drying (controlled to 8-12% moisture content) to prevent internal stress and cracking. Interior finishes utilize environmentally safe, low-VOC German waterborne paints (such as Remmers or Zobel) that preserve natural grain texture while protecting against fungi and insect attacks.

For seaside hotels, coastal villas, and high-salinity island projects, we specify marine-grade surface treatments. Exterior aluminum profiles are treated with 3-coat fluorocarbon PVDF powder finishes (conforming to AAMA 2605) or hard anodizing, capable of passing 3,000+ hours of continuous salt-spray testing. Hardware components are upgraded to SS316 stainless steel and anti-corrosion multi-point locks.

Standard manufacturing lead time is approximately 30 to 45 calendar days following final shop drawing confirmation and deposit receipt. For export shipping, all units are wrapped in protective polyethylene foam, sealed in moisture-proof shrink wrap, and packed inside fully enclosed fumigated plywood crates with corner guards to eliminate transit damage during ocean freight.

We offer global tier-1 hardware options based on budget and project specification, including German Roto Frank, Siegenia-Aubi, GU (Gretsch-Unitas), Hoppe, and high-precision proprietary Chinese hardware systems. Multi-point gear locks, heavy-duty load-bearing rollers (up to 400kg per leaf for lift-and-slide doors), and hidden concealed hinges come standard.

Yes. For major commercial developments, resort complexes, and curtain wall integrations, our senior technical engineers can travel to project sites globally to oversee installation sequencing, check structural anchoring alignment, conduct field water testing, and train local installation crews.