Engineered for extreme thermal variations, atmospheric resilience, and modern aesthetics across Argentina.
Argentina represents one of the most microclimatically diverse construction markets in South America. Extending over 3,700 kilometers from latitude 22°S to 55°S, architectural envelopes face extraordinarily varying environmental strains. From the humid subtropical dynamics of the Pampas region to the subpolar gale-force wind shear of Patagonia and the extreme UV irradiance of the Andean high-altitude zones, off-the-shelf fenestration systems consistently fail to deliver long-term thermal efficiency or structural integrity.
As leading aluminium composite windows manufacturers and suppliers for Argentina, Doorreme Aluminum Industry Co., Ltd. custom engineers specialized composite and thermal-break profile architectures tailored to satisfy Argentina’s stringent national standard IRAM 11507 (Thermal Performance of Windows) and IRAM 11508 (Air Permeability and Water Tightness). Modern Argentine developers, general contractors, and architectural firms are rapidly moving away from unreinforced PVC and traditional non-insulated single-glazing aluminum systems toward high-durability aluminium-composite, structural silicone glazed (SSG), and aluminum-clad timber fenestration.
In high-density commercial developments within the Autonomous City of Buenos Aires (CABA) and luxury gated communities (Barrios Privados) in Pilar, Tigre, and Nordelta, window selection directly impacts building appraisal and operational energy consumption. Aluminium composite window frame systems engineered by Doorreme combine extruded high-grade 6063-T5/T6 structural aluminum alloys with integrated thermal barriers, exterior fluoropolymer PVDF coatings, and interior engineered composite or timber linings.
Utilizes 24mm to 34mm German-engineered PA66 GF25 (25% Glass Fiber Reinforced Polyamide) thermal strips to completely eliminate metal-to-metal thermal conduction paths.
Coated with 3-coat/2-bake AkzoNobel PVDF (Fluoropolymer) or seaside-grade powder coating reaching 60–80 microns thickness, resisting coastal salt spray in Mar del Plata and Puerto Madryn.
Configured with asymmetric double/triple tempered laminated glass units (e.g., 6mm Low-E + 12A Argon + 5mm+0.76PVB+5mm), achieving noise reduction indexes up to Rw = 42 dB.
Architects, project engineers, and procurement agents in Argentina require exact engineering tolerances when specifying Fenestration products for containerized shipping from China. Below is the technical specification matrix engineered for Doorreme’s Argentine composite window supply chain:
| System Series | Profile Wall Thickness | Thermal Barrier (PA66) | Glazing Specification | Wind Load Resistance (Pa) | Target Argentine Region |
|---|---|---|---|---|---|
| Aluminium Clad Wood Passive | 1.8 mm – 2.2 mm | Integrated Wood Composite | 6mm Low-E + 16Ar + 6mm Laminated | ≥ 4500 Pa (Class 5) | Patagonia (Bariloche, Ushuaia) |
| Thermal Break Casement 75 | 1.6 mm – 2.0 mm | 24 mm Polyamide Strip | 5mm + 12A + 5mm Double Tempered | ≥ 3800 Pa (Class 4) | Buenos Aires AMBA, Rosario, Córdoba |
| Slim Minimalist Sliding System | 2.0 mm – 3.0 mm | Hidden Sub-frame Thermal Break | 8mm Tempered + 14Ar + 8mm Tempered | ≥ 3000 Pa (Class 3) | Coastal Vistas (Mar del Plata, Pinamar) |
| Heavy Duty Bi-Fold Door System | 2.0 mm | 20 mm Polyamide Strip | 6mm + 12A + 6mm Double Tempered | ≥ 3500 Pa (Class 4) | Wine Estates (Mendoza, San Juan) |
Doorreme’s manufacturing capabilities cater specifically to localized environmental challenges across key Argentine territory zones:
Locations: San Carlos de Bariloche, San Martín de los Andes, Ushuaia.
Engineering Challenge: Severe sub-zero temperatures, heavy snow accumulation, and fierce westerly winds.
Solution: Super energy-efficient aluminium-clad wood passive windows with triple glazing and warm-edge spacers, preventing interior surface condensation and minimizing heat loss.
Locations: Puerto Madero, Palermo, Recoleta, Belgrano.
Engineering Challenge: Acoustic pollution from urban traffic, wind pressures at 30+ story elevations.
Solution: Structural silicone glazed (SSG) curtain wall modules and slim frame casement windows integrated with German Roto multi-point locking mechanisms for maximum sound attenuation.
Locations: Mendoza, San Juan, Salta.
Engineering Challenge: Extreme diurnal temperature spikes, heavy solar radiation, hot Zonda wind events.
Solution: Thermal break aluminum sliding systems equipped with High-Reflective Solar Control Low-E glass units, preventing solar heat gain while preserving mountain sightlines.
Locations: Mar del Plata, Pinamar, Cariló.
Engineering Challenge: High atmospheric salinity, wind-driven rain penetration.
Solution: 3-coat fluoropolymer PVDF finished aluminium bi-fold and lift-and-slide patio doors using SS304 marine-grade hardware components and dual EPDM gasket sealing.
With a sprawling 123,000 square meter modern production complex located in Foshan—China’s premier aluminum manufacturing hub—Doorreme Aluminum Industry Co., Ltd. has established itself as an authoritative global partner for large-scale fenestration packages since 2004.
We work closely with Argentine importers and their Despachantes de Aduana (Customs Brokers). We provide complete HS Code classifications (typically under 7610.10 for aluminum doors/windows), detailed packing lists with net/gross weights, itemized commercial invoices, and Certificates of Origin (Form A) to ensure smooth customs declaration and compliance with local import regulatory frameworks.
Yes. Our structural profiles and insulated glass assemblies are manufactured to meet or exceed IRAM 11507 standards for thermal insulation, IRAM 11508 for air infiltration/water resistance, and IRAM 12565 for structural safety glass compliance. Test reports and technical datasheets can be submitted directly to your project’s technical director (Director de Obra).
Following final approval of production shop drawings, factory manufacturing takes approximately 25 to 35 days. Direct ocean transit from South China ports (Shenzhen/Guangzhou/Foshan) to the Port of Buenos Aires generally takes 35 to 45 days. We recommend initiating procurement 90 days prior to site installation milestones.
Absolutely. We offer complete customization according to RAL color codes, including matte textured finishes, custom anodized tones (Bronze, Champagne, Natural), high-durability PVDF coatings, and real wood grain transfers suitable for both traditional and contemporary architectural aesthetics.
For major commercial or high-rise curtain wall projects, Doorreme can send technical directors and field engineers directly to Argentina to supervise installation sequencing, sub-frame alignment, and weatherproofing sealing. For residential projects, we provide step-by-step installation manuals, exploded structural diagrams, and video technical support.
Partner directly with a proven Foshan manufacturer. Send us your architectural drawings, elevation plans, or CAD files today for a comprehensive engineering evaluation and direct factory quotation.
Contact Us
English