Directly sourced from our 123,000 m² Foshan manufacturing complex. Custom-engineered for cold-climate durability, structural soundproofing, and energy conservation.
Procuring architectural fenestration systems for real estate developments in Moscow requires navigating one of the world's most demanding climatic zones. Characterized by severe winter sub-zero temperatures dropping below -30°C, extreme freeze-thaw cycles, high wind-load pressures on urban high-rises along the Moskva River, and strict municipal heat retention regulations (GOST 23166-99 standards), standard residential window frames are structurally inadequate. As a premier China Aluminum Swing Window Factory & Exporter, Doorreme Aluminum Industry Co., Ltd. delivers custom-engineered, multi-cavity thermal break aluminum swing window systems tailored specifically for Russian structural contractors, architectural firms, and B2B building material importers in the Greater Moscow Region (including Central Administrative Okrug, New Moscow, and Moscow Oblast).
Information Gain Insight: Standard aluminum profiles without engineered polyamide thermal barriers suffer from severe cold bridging, leading to interior frame frost build-up and energy leakage. Doorreme’s Moscow-spec swing windows utilize 34mm PA66-GF25 reinforced thermal strips paired with triple-glazed Argon insulating units (IGUs) to lower the total system heat transfer coefficient to U ≤ 0.85 W/m²K.
Modern architectural trends in Moscow have shifted dramatically toward oversized, full-height floor-to-ceiling swing (casement and tilt-and-turn) windows that maximize natural daylight while maintaining zero compromise on building envelope security and thermal resistance. Achieving structural stability across massive sash dimensions demands precision 6063-T6 T5/T6 grade aluminum extrusions, multi-point perimeter locking gear, and heavy-duty concealed hinges capable of supporting sash glass weights exceeding 120 kg per unit.
Integrated 34mm techno-polymer polyamide strips break thermal conductivity between exterior and interior frames, blocking sub-zero frost migration.
Configured with double-chamber 5mm + 16Ar + 5mm Low-E + 16Ar + 5mm tempered glass filled with 90%+ Argon gas for maximum solar & thermal control.
Equipped with premium German Siegenia or Roto hardware gear systems providing 6 to 10 security locking points per sash against forced entry.
Aluminum swing windows (including Inward Tilt & Turn and Outward Casement configurations) provide superior weather-sealing compared to traditional sliding frames due to continuous triple-gasket EPDM perimeter seals that compress tightly against the frame upon closure. In Moscow, these systems are deployed across diverse architectural typologies:
High-end private villas require customized timber-effect fluorocarbon (PVDF) powder coating or anodized black frames that match contemporary Scandinavian or minimalist Russian architectural aesthetics, combined with laminated security glass.
Elevated wind loads at heights above 20 stories require enhanced frame wall thicknesses (1.8mm to 2.2mm) capable of resisting structural wind pressures up to 5000 Pa, certified according to wind zone standards.
Commercial entrance swing doors and operable window partitions demand heavy-duty commercial aluminum profiles featuring anti-corrosion, wear-resistant hardware designed for heavy daily foot traffic in public spaces.
| Technical Parameter | Standard Commercial Aluminum Window | Doorreme Moscow-Grade Thermal Swing Window | Compliance Standard |
|---|---|---|---|
| Thermal Transmittance (U-Value) | 2.8 - 3.5 W/m²K | U ≤ 0.85 W/m²K | GOST 23166-99 Class A1 |
| Profile Aluminum Alloy Grade | Recycled Alloy (1.2mm wall) | 6063-T6 Primary Billet (1.8mm - 2.2mm) | GB/T 5237-2017 / EN 755 |
| Thermal Break Insulation Strip | 14mm PVC / Standard Nylon | 34mm PA66-GF25 (25% Glass Fiber Reinforced) | ISO 14001 / DIN 4108 |
| Air Infiltration Rate | Level 4 (q ≤ 1.5 m³/m·h) | Level 8 (q ≤ 0.5 m³/m·h) | EN 12207 Class 4 |
| Acoustic Sound Insulation | 25 - 30 dB | 42 - 48 dB (Acoustic Laminated IGU) | EN ISO 717-1 soundproof rating |
| Surface Coating Guarantee | Standard Powder Coating (3-5 Yrs) | AkzoNobel / PPG PVDF Coating (20+ Yrs) | AAMA 2605 / QUALICOAT Class 2 |
Founded in 2004, Doorreme Aluminum Industry Co., Ltd. (operating from a massive 123,000 m² modern manufacturing complex in Shishan Town, Foshan, China) has grown into a world-class architectural fenestration enterprise. Supported by over 800 skilled specialists, automated Italian CNC extrusion processing lines, and German assembly technology, Doorreme produces over 500,000 square meters of custom aluminum windows, structural glass doors, and curtain wall systems annually.
Our dedicated B2B engineering department supports foreign developers, importers, and main contractors throughout every step of project procurement: from CAD/BIM shop drawing production, structural wind pressure calculations, custom die extrusions, glass spectrophotometric testing, to export-grade sea-freight steel crate packaging and international logistics facilitation.
We convert architectural schematics into production-ready millimetric shop drawings, ensuring flawless integration with local Russian construction dimensions.
Products undergo rigorous factory pressure chamber testing for water tightness (EN 12208), air permeability, and mechanical endurance up to 50,000 sash opening cycles.
Units are fully wrapped with protective film, edge protectors, and secured inside fully enclosed plywood cases or heavy steel racks designed for seamless unloading in Moscow hubs.
Direct technical answers addressing international trade, climate specification compliance, logistics, and customization options for Russian clients.
Send your architectural elevation drawings, window schedules, or project opening dimensions directly to our Senior Engineering Sales Specialists for a detailed technical proposal and factory-direct price quotation.
English